2.4G High Power Portable Drone UAV Jammer ZA-T05

2.4G High Power Portable Drone UAV Jammer ZA-T05

Description

ZA-T05 Portable Drone Jammer can efficiently block the signal connection between the drone and the remote control, forcing the drone to land or return to flight in just a dozen seconds. This is a drone jammer designed for portability. Small and light, it is ideal for managing illegal drones. Is the first choice of the city security management department, but also to protect their privacy and security good helper. It can be applied at meeting rooms, conference rooms, museums, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security

Note:
For some locations of special purpose such as hospitals, gas stations and more, please do field test first to make sure no interference happened to the normal operation of their equipment and instrument

Detail

Main promotion scheme (frequency point can be customized according to customer requirements)

Technical details

1. Safe and flexible use: portable rod box design, small size, light weight; The system automatically starts overload protection when the voltage or current is abnormal

2. Scope of interference objects: unmanned aerial vehicle navigation, control, data transmission frequency.

power control: each module can be connected to R232 interface separately for software setting, and the module power and frequency can be modified.  Each transmitting module supports setting 4 independent frequency bands in the frequency range;

3. Single module design, convenient for disassembly, upgrading and maintenance, any module problems do not affect the operation of other modules, then· for subsequent maintenance, if the module needs to be replaced, it can be simply plugged and unplugged without interfering with the normal work of other modules.  Equipment Support the separate setting of "special frequency of police law enforcement" to avoid affecting the normal use of "police communication system";

4. Customizable frequency band (20-6000), extending two or more chassis according to customer requirements.  The portable design of pull rod box is suitable for emergency transfer, temporary control and other environments, convenient and flexible, which can be used both portable and vehicle-mounted. Cable control function: 2 hosts can be controlled by wire control box, and each host has 5 frequency bands to open and close.

5. LCD display function: it can display the working status of each transmitting module through the LCD of transmitting module in the host. Including power, frequency, standing wave ratio, current voltage, temperature and operating state.

6. One-button start function: external short-circuit terminals can be connected, and all transmitting modules can be opened after the power is turned on.

7. Each module is equipped with an efficient and intelligent cooling fan, which automatically starts cooling when the operating temperature reaches 45 degrees to ensure efficient cooling and extend the service life of the equipment.

8. Electrical strength: comply with the electrical strength test of 45h2-65hz specified in gb16796-2009, requiring 21 minutes No wear and arc phenomenon;

9. Leakage current: in line with the provisions of gb16796-2009, the leakage current test is conducted for class 1 equipment, and the total current is s0. 61MA;

10. Insulation resistance: it conforms to the insulation resistance test and the requirements of safety protection and alarm equipment.  The total resistance value is not less than 150MΩ;